|
Directions For
Facial Use :
Session 1 - 2 minutes
1.
Cleanse face and Neck with cleanser of your choice. Pat dry with
towel.
2.
Apply Pre-Treat gel and spread approximately 1/4 of the tube's
contents on the surface of your skin. Make sure that all areas are
covered except the eyelids.
3.
Activate the Spa System by pressing the gray button one time. The
symbol will appear on the LCD screen. Place your damp hand on the chrome
panel and the chrome tip of the instrument against your cheek. The
instrument will automatically analyze the skin and set the current
level. You will hear 1, 2, or 3 beeps depending on your skin's needs.
4.
Move the instrument over your face slowly, making sure you touch
all the areas covered by the Pre-Treat Gel. You may feel a tingling
sensation in some areas, which is normal. The instrument beeps every 20
seconds, while in the In-Progress mode, as long as you are making
contact with the skin.
5.
After 2 minutes, the instrument will beep two times and Session 1
is complete.
Session 2 - 3 minutes
1. Apply approximately 1/4 of the Treatment Gel on the surface of
your skin.
2. Activate step 2 by pressing the gray button 1 time.
3. Following the first procedure, place the chrome tip of the
instrument against your cheek
in order to analyze the skin and set the
current level. The instrument will beep 1, 2, or 3 times.
4. Move the instrument over your face slowly until the instrument
beeps 2 times signaling the end
of the 3 minute treatment.
5. Push the button once more to turn off the instrument. If you
forget to shut down the instrument
it will automatically shut off in 10
minutes.
Wipe any excess gel off the skin with a damp cloth.
Use regular toner and moisturizer if desired.
Use the Spa System and gels only 2 - 3
times a week and receive the benefits of smoother skin,
increased radiance, fewer fine lines and wrinkles, and increased skin
firmness.
|